• 1 Teradek Bolt 500 Transmitter
• 1 Teradek Bolt 500 Reciever
• 2x P tap -> 2 Pin lemo
• 1x Teradek AC power

This can be paired with a wireless directors cage with a TV Logic 5.6" or Odyssey 7Q Monitor for an additional fee.

Brand new wireless system from BOLT. Comes in a box with all accessories listed below.

1x - Receiver
1x- Trasnmitter
+ Comes with a case

1 x Protective SKB Case - military-standard waterproof hard case with custom foam (13.5in x 9.5in x 6.5in - 34.29cm x 24.13cm x 16.51cm) 1 x Wooden Camera Ultra Arm Mini Monitor Mount (1/4-20 to 1/4-20) with Arm Ball (3/8-16) 1 x Wooden Camera NATO Lock Kit 1 x Teradek Vinyl Zipper Bag 250x150mm 1 x Hex L Key 2.5 mm size 3-5/6 inch length 1 x Hex L key 3/16inch x 2 13/16inch length 1 x factory-installed Gold Mount (female) Battery Plate 14.4V attached to RX 1 x 2-pin Connector to PowerTap 18 inch Cable 1 x Hot Shoe Adapter (1/4"-20 inch) 2 x Antenna 2dBi WiFi 2.4/5.8 GHz 1 x USB 2.0 Cable (A-Male to Mini-B) 1 x HDMI 18in Cable (Type A to Type A) 1 x SDI (BNC to BNC) Cable 10 inch 1 x Lightstand Adapter (1/4"-20 inch) 1 x USB 2.0 Cable (A-Male to Mini-B) 1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable 1 x HDMI 18in Cable (Type A to Type A) 1 x SDI (BNC to BNC) Cable 10 inch *** ODYSSEY 7Q avail upon request ****

• 1x Teradek Bolt 500 LT SDI Tx
• 2x 2 Pin Lemo AC Power Cables
• 4x Short SDI Cables
• 2x Antennas
• 1x Teradek Bolt 500 LT SDI Rx
• 4x P-Tap to 2 Pin Lemo Power Cables

• 1x Teradek Bolt 500 LT SDI Tx
• 2x Teradek Bolt 500 LT SDI Rx
• 2x 2 Pin Lemo AC Power Cables
• 4x P-Tap to Pin Lemo Power Cables
• 4x Short SDI Cables
• 2x Antennas

TERADEK BOLT 500

One Bolt 500 SDI/HDMI Transmitter and Receiver kit includes:
1x Bolt 500 transmitter;
1x Bolt 500 receiver;
2x PTap to Lemo power cable;
2x SDI cable.
NO HDMI cables.

• 2-Pin Lemo Power to D-Tap Cable (for TX)
• 2-Pin Lemo Power to D-Tap Cable (for RX)
• 2-Pin Lemo Power to AC (for TX or RX)
• 3G SDI Cable - 6ft
• 3G SDI Cable - 1.5ft
• 3G SDI Cable - 4ft
• 2x Teradek TX Antennas
• Wooden Camera 1/4-20 to 1/4-20 Ultra Arm

Teradek 500 LT - SDI ONLY (No HDMI Connection on TX or RX)

The newest generation of Teradek Wireless video transmitters. Rated for up to 500ft under ideal conditions, will be more limited in high traffic areas and with walls/obstructions.

Includes more accessories than pictured.

Please reach out with questions! Also I have other listings with complimentary items - monitors, director cage, etc.

• Transmitter
• Receiver
• All cables
• Optional Accessories: Pix E7 Monitor, Wooden Camera directors monitor cage V2 with Anton mount.

Optional Pix E7, cage and anton batteries to run the whole unit.

Teradek Bolt 500 SDI/HDMI 2:1

Happy to bundle with magic arms for ease of use

• Ultra Arm Mini Monitor Mount
• 2x 2-Pin LEMO to P-Tap Cable 18"
• 2x Coiled 2' BNC SDI Cables
• 1x 2-Pin AC Power Cable (Receiver)
• Pelican Case
• 2x HDMI Cable
• USB Mini to USB A Cable

The Bolt 500 SDI/HDMI Wireless Video Transceiver Set from Teradek includes one Bolt Pro 500 3G-SDI/HDMI transmitter and one Bolt 500 3G-SDI/HDMI receiver packed in a protective SKB case along with mounting brackets for both transmitter and receiver units. Also included in this set is the Wooden Camera Ultra Arm mini monitor mount with a 3/8"-16 arm ball. This set supports video transmission up to 500'.

The Bolt 500 3G-SDI/HDMI Video Transmitter from Teradek transmits visually lossless video up to 500' with no delay. Within the unlicensed 5 GHz channel range, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the transmitter supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware. The built-in HDMI to SDI converter allows you to connect both your on-camera monitor and video source via the same device, thereby making Bolt 500 suitable for use with MoVI and other separately available gimbals.

Eleven 5 GHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power

1 Teradek Bolt Pro Plus 500 TX Transmitter 1080P
1 Teradek Bolt Pro Plus 500 RX Receiver 1080P
1 Ikan Director / DP/ AC Handheld Bracket for TV Logic 5.6″ / DP7 7.7″
1 3/8 16″ – 1/4 20″ RAM Mount For Transmitter
1 Thumbscrew RX
2 12″ Teradek 3-pin to D-Tap Power Power Cable for Teradek TX
3 12′ Teradek 2-pin to D-Tap Power Power Cable for Teradek RX
1 30″ Teradek RS 2-pin D-Tap to 12v RS 2-pin Lemo Power Cable for Teradek RX
1 AC Power Adapter TX / RX

1 Teradek Bolt Pro Plus 500 TX Transmitter 1080P
2 Teradek Bolt Pro Plus 500 RX Receiver 1080P
1 Ikan Director / DP/ AC Handheld Bracket for TV Logic 5.6″ / DP7 7.7″
1 3/8 16″ – 1/4 20″ RAM Mount For Transmitter
1 Thumbscrew RX
2 12″ Teradek 3-pin to D-Tap Power Power Cable for Teradek TX
3 12′ Teradek 2-pin to D-Tap Power Power Cable for Teradek RX
1 30″ Teradek RS 2-pin D-Tap to 12v RS 2-pin Lemo Power Cable for Teradek RX
1 AC Power Adapter TX / RX

1 Teradek Bolt Pro Plus 500 TX Transmitter 1080P
3 Teradek Bolt Pro Plus 500 RX Receiver 1080P
1 Ikan Director / DP/ AC Handheld Bracket for TV Logic 5.6″ / DP7 7.7″
1 3/8 16″ – 1/4 20″ RAM Mount For Transmitter
1 Thumbscrew RX
2 12″ Teradek 3-pin to D-Tap Power Power Cable for Teradek TX
3 12′ Teradek 2-pin to D-Tap Power Power Cable for Teradek RX
1 30″ Teradek RS 2-pin D-Tap to 12v RS 2-pin Lemo Power Cable for Teradek RX
1 AC Power Adapter TX / RX

• Hard Case
• 2x 12" HDMI Cable
• 2x 12" SDI Cable
• 2x 2pin Lemo to P-Trap
• 2pin Lemo to AC Power Adapter

This rental includes:
1 Hard Travel Case
1 Transmitter (HDMI/SDI)
1 Receiver (HDMI/SDI)
2 12" HDMI Cable
2 12" SDI Cable
2 2pin Lemo to P-Trap
1 2pin Lemo to AC Power Adapter

The Bolt 500 3G-SDI/HDMI Video Transceiver Set from Teradek includes one Bolt 500 3G-SDI/HDMI video transmitter and one Bolt 500 3G-SDI/HDMI video receiver. The combination of these lets you transmit video signals a distance up to 500'. Both transmitter and receiver feature metadata and timecode support, 3D LUTs, dual inputs/outputs, are multicast capable, and offer manual frequency selection and the USB 3.0 GRAB Engine.
Bolt 500 3G-SDI/HDMI Video Transmitter
The Bolt 500 3G-SDI/HDMI Video Transmitter from Teradek transmits visually lossless video up to 500' with no delay. Within the unlicensed 5 GHz channel range, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the transmitter supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware. The built-in HDMI to SDI converter allows you to connect both your on-camera monitor and video source via the same device, thereby making Bolt 500 suitable for use with MoVI and other separately available gimbals.

Eleven 5 GHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power
Bolt 500 3G-SDI/HDMI Video Receiver
The Bolt 500 3G-SDI/HDMI Video Receiver from Teradek receives visually lossless video from up to 500' away with no delay. With 40 MHz channel, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the receiver supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs without any additional hardware.

Eleven 40 MHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power

Kit Includes:
• Bolt 500 3G-SDI/HDMI Video Transmitter
• Bolt 500 3G-SDI/HDMI Video Receiver
• Ace 500 HDMI Video Receiver
• (2) 18" 2-Pin LEMO to PowerTap Cable
• 1/4"-20 Hot Shoe Adapter
• (2) 10" SDI (BNC-to-BNC) Cable
• (2) 18" HDMI Type A to Type A Cable
• 1.25" Long 1/4"-20 Thumb Screw
• 1/4"-20 Lightstand Adapter
• 3' USB 3.0 Type-A to Micro-USB Type-B Cable
• 6' PSU 2-Pin LEMO to 18W AC Adapter Cable
• Mini-USB (5pin) to USB - 18in/45cm Cable
• Ultra Thin HDMI Male Type A to HDMI Male Type A 18 Inch
• Power Adapter Cable 2-Pin D-Tap Male to 2.1mm Barrel DC (17.5 inches)
• R/A Barrel Power Supply Unit 18W AC Adapter 12VC 6 ft

The Teradek Ace 500 is a compact, ultralight wireless video system that delivers uncoAce 500 is designed with the same reliability and performance as the Teradek Bolt line, ensuring you have a continuous video feed when you need it the most.

Impressed 1080p60 video at up to 500 ft. with zero delay.

Kit Includes:
1 x Ace 500 RX [10-1807]
1 x Mini-USB (5pin) to USB - 18in/45cm Cable [11-1267]
1 x Ultra Thin HDMI Male Type A to HDMI Male Type A 18 Inch [11-1235]
1 x R/A Barrel Power Supply Unit 18W AC Adapter 12VC (International) 6 ft [11-0058]
1 x Power Adapter Cable 2-Pin D-Tap Male to 2.1mm Barrel DC (17.5 inches)

he Bolt 500 3G-SDI/HDMI Video Transceiver Set from Teradek includes one Bolt 500 3G-SDI/HDMI video transmitter and one Bolt 500 3G-SDI/HDMI video receiver. The combination of these lets you transmit video signals a distance up to 500'. Both transmitter and receiver feature metadata and timecode support, 3D LUTs, dual inputs/outputs, are multicast capable, and offer manual frequency selection and the USB 3.0 GRAB Engine.
Bolt 500 3G-SDI/HDMI Video Transmitter
The Bolt 500 3G-SDI/HDMI Video Transmitter from Teradek transmits visually lossless video up to 500' with no delay. Within the unlicensed 5 GHz channel range, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the transmitter supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware. The built-in HDMI to SDI converter allows you to connect both your on-camera monitor and video source via the same device, thereby making Bolt 500 suitable for use with MoVI and other separately available gimbals.

Eleven 5 GHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power
Bolt 500 3G-SDI/HDMI Video Receiver
The Bolt 500 3G-SDI/HDMI Video Receiver from Teradek receives visually lossless video from up to 500' away with no delay. With 40 MHz channel, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the receiver supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs without any additional hardware.

Eleven 40 MHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power

Kit Includes:
• Bolt 500 3G-SDI/HDMI Video Transmitter
• Bolt 500 3G-SDI/HDMI Video Receiver
• (2) 18" 2-Pin LEMO to PowerTap Cable
• (2) 10" SDI (BNC-to-BNC) Cable
• (2) 18" HDMI Type A to Type A Cable
• 1.25" Long 1/4"-20 Thumb Screw
• 1/4"-20 Lightstand Adapter
• 3' USB 3.0 Type-A to Micro-USB Type-B Cable
• 6' PSU 2-Pin LEMO to 18W AC Adapter Cable