|
|
|
|

RigWheels Cloud Mount Mid-Size - Magnetic Chase Car Mount

With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount the possibilities are endless for placing your camera in the perfect position to get the perfect shot. The ease and quickness of the RigMount X will make this magnetic camera mount configuration your ‘go to’ tool for fast and easy camera placement.
Suction mounts are prone to vibration because of the rubber components. Because this magnet camera mount uses less rubber material than suction mounts your shots will be more stable with less vibration than a three suction mount. The rubber coating on RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet.

2 results
Cloud Mount Side Car Pro + Spider Mount and Leveler

This package includes two different mounting systems to be used separately or combined: The Rig Wheels Side Car Pro and at the Camtree Spider Mount. The Cloud Mount on its own works great for flat surfaces but doesn't conform well if the surface changes angle abruptly (some side panels, minivan hoods, etc.). By combining the rig wheels isolation plate and magnetic runners with the Spider mount you can adapt to just about any smooth surface and still have the magnetic and isolation features of the Cloud Mount. Best of both worlds. Unlike other Cloud Mount packages offered, this one comes with a Benro 100lb leveler, which enables the gimbal to be level at the mounting point. This puts less stress on the pan motor making for a more responsive and accurate gimbal. Also, included is a rubber ball bladder and pump for fine tuning spring rate for varying road and load conditions. EXTRAS: Cinemilled Movi Mount Dove Block Ronin Mount Benro 100lbs Leveller Bladder / Pump Petrol, soft carrying case and shoulder strap. Fits in overhead. Check out the video. https://vimeo.com/160542127 Included: (1) Cloud Mount Vibration Isolator (3) Rig Plate (6) Rig Axle (10) Vibration Isolator Cable Clamp (8) 1/4" x 7" Cables (18) Socket Button Head (1) 3/8"x3/4" Bolt (1) 3/8" Washer (4) 5/16"x2" Thumb Knob (6) 5/16" x 1" Thumb Knob (2) 5/16" x 1.5" Bolt (6) 5/16" Washer (4) 5/16" Wing Nut (16) Magnetic Mounts - Long (8) A Cup Suction Cup (8) C Cup Suction Cup (2) 5/16"x7/8" Bolt (1) 3/16" Hex Key (1) 5/32" Hex Key (1) Petrol Soft Case (1) Benro 100lb Leveler (1) Utility Ball and pump (1) Dove Block Ronin Mount (1) Cinemilled Movi Mount (1) Camtree Spider Mount Package (See picture for included items).

More

OWNER NOTES

This package includes two different mounting systems to be used separately or combined: The Rig Wheels Side Car Pro and at the Camtree Spider Mount. The Cloud Mount on its own works great for flat surfaces but doesn't conform well if the surface changes angle abruptly (some side panels, minivan hoods, etc.). By combining the rig wheels isolation plate and magnetic runners with the Spider mount you can adapt to just about any smooth surface and still have the magnetic and isolation features of the Cloud Mount. Best of both worlds. Unlike other Cloud Mount packages offered, this one comes with a Benro 100lb leveler, which enables the gimbal to be level at the mounting point. This puts less stress on the pan motor making for a more responsive and accurate gimbal. Also, included is a rubber ball bladder and pump for fine tuning spring rate for varying road and load conditions.

EXTRAS: Cinemilled Movi Mount Dove Block Ronin Mount Benro 100lbs Leveller Bladder / Pump Petrol, soft carrying case and shoulder strap. Fits in overhead. Check out the video. https://vimeo.com/160542127

Included:
(1) Cloud Mount Vibration Isolator
(3) Rig Plate
(6) Rig Axle
(10) Vibration Isolator Cable Clamp
(8) 1/4" x 7" Cables (18) Socket Button Head
(1) 3/8"x3/4" Bolt
(1) 3/8" Washer
(4) 5/16"x2" Thumb Knob
(6) 5/16" x 1" Thumb Knob
(2) 5/16" x 1.5" Bolt
(6) 5/16" Washer
(4) 5/16" Wing Nut
(16) Magnetic Mounts - Long
(8) A Cup Suction Cup
(8) C Cup Suction Cup
(2) 5/16"x7/8" Bolt
(1) 3/16" Hex Key
(1) 5/32" Hex Key
(1) Petrol Soft Case
(1) Benro 100lb Leveler
(1) Utility Ball and pump
(1) Dove Block Ronin Mount
(1) Cinemilled Movi Mount
(1) Camtree Spider Mount Package (See picture for included items).
$150
per day
$150
per day
RigWheels Suction Cup Car Mount w/ Toad-in-the-Hole for Movi

Includes: - 8 x A-Cup suction cups - Toad in the Hole mount for Movi (Freefly)

More

OWNER NOTES

Includes:
- 8 x A-Cup suction cups
- Toad in the Hole mount for Movi (Freefly)
$113
per day
$113
per day
⬆ Back to the Top

With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount the possibilities are endless for placing your camera in the perfect position to get the perfect shot. The ease and quickness of the RigMount X will make this magnetic camera mount configuration your ‘go to’ tool for fast and easy camera placement.
Suction mounts are prone to vibration because of the rubber components. Because this magnet camera mount uses less rubber material than suction mounts your shots will be more stable with less vibration than a three suction mount. The rubber coating on RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet.