*BRAND NEW*
Complete wireless system for controlling Focus and Iris or Zoom remotely. Comes with two motors, two handgrips, and FIZ control unit - a versatile wireless lens control system with up to three axis of control. Great for any setup, including a single operator using a Gimbal or handheld rig.

(1) Wireless FIZ Hand Unit
(2) Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings
(1) Wireless Handle Left (Focus)
(1) Wireless Handle Right (Iris, Zoom)
(4) Follow Focus marking disks
(1) 7-Pin to 740mm P-TAP Motor Power Cable
(1) 296mm 7-Pin to 7-Pin Straight Motor Connection Cable
(1) 180mm 7-Pin to 7-Pin Straight Motor Connection Cable
(6) 18650 Battery
(1) 18650 4 Slot Battery Charger
(2) Handle to Arri Standard Rosette Adapter
(2) Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)
(1) Wireless FIZ Hand Unit Strap
(1) Hard Shell Waterproof Safety Case

FIZ hand unit is capable of controlling 3 channels - focus, zoom, and iris as well as overriding the hand grips. Motors can calibrate on lenses without hard stops - such as photo-lens with follow focus gears.
Motors fit standard 15mm and 19mm Rods . Ideal for Gimbal, Drone, and Shoulder-mounted setups

See how it works here:
https://www.youtube.com/watch?v=IR87KKcgqxU

Contact me with any questions!

The Tilta Nucleus-M Wireless Lens Control System features a 1000' transmission range, and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller, and two handgrips—one to control focus, and the other iris and zoom. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, which enables you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.

• 2x Tilta motors
• 2x Handles for handheld or gimbal single operator use
• 1x Hand unit
• 8x Batteries
• 1x Charger
• 2x Rosette adaptors
• 2x Clamps for gimbal use

Tilta 2-Motor system. In crisp condition with 8x batteries, enough for both handles and hand unit if you need to run zoom or iris on the handles while the AC pulls focus.

Kit from Tilta. Includes hand unit rosette adapter.

Tilta Nucleus M Follow Focus Controller and motor
Single Motor

• Partial Kit I
• 4 Batteries
• Tilta Nucleus-M Battery Charger
• Tilta Lanyard for Nucleus-M FIZ Hand Unit
• Tilta Nucleus-M Follow Focus Marking Disk
• Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable
• Tilta DSLR Lens Follow Focus Adapter
• Tilta Nucleus-M FIZ Lens Control Motor
• Tilta Nucleus-M FIZ Hand Unit

The Tilta Nucleus-M Wireless Lens Control System Partial Kit I contains the essential elements for pulling focus wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, one Nucleus-M motor, one removable lens belt, a motor power cable, two marking disks for the hand unit, a lanyard for the hand unit, a battery charger unit, and two 18650 batteries. The system enables pulling focus, iris, or zoom on your lens, and if you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single-axis system, but the hand unit will allow you to control additional motors (not included) so you can control more than one lens ring. The system can wirelessly pull focus from up to 1000' away, and the batteries can power the hand unit for approximately 10 hours on a single charge. The lanyard attaches to the hand control unit, allowing you to wear it around your neck.

This package has 1 motor.

https://tilta.com/shop/nucleus-m-wireless-follow-focus/

More information on BnH:
https://www.bhphotovideo.com/c/product/1507992-REG/tilta_wlc_t03_k1_nucleus_m_wireless_lens_control.html/overview

Compatible Batteries
26650, 22650
18650, 18490, 18350
17670, 17500
16340, 14500, 10400
RCR123
NiMH/NiCd: AA, AAA, AAAA, C

Features
3-channel wireless lens control unit
Control focus, iris, and/or zoom
Short-, medium-, and long-range transmission options
15-channel selection minimizes outside interference
Powered via two 18650 rechargeable lithium-ion batteries (not included)
Up to 10-hour runtime on a single charge
Ambidextrous design with large wood-edged knob

Brushless motor with an integrated motor drive
Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
Motor clamps onto 19mm or 15mm rods (with included bushing)
Power via separately available D-Tap cable or daisy-chain to additional motors
Automatic and manual calibration
For focus, iris, or zoom control
High, medium, and low torque settings
Status display window

c300ii, teradek, odyssey 7q+ and LED lighting also available!
The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips with a range of about 1,000 Ft.

*What the kit includes:

• Wireless FIZ Hand Unit
• 2 x Wireless Motors
• 2 x 19mm Motor Rod Clamps
• 2 x 19 to 15mm Bushings
• 15mm and 19mm Quick Release Hand Grip Bridge
• Wireless Left Handle (Focus)
• Wireless Right Handle (Iris, Zoom)
• 4 x Follow Focus Disks
• 7-Pin to D-Tap Motor Power Cable (29")
• 7-Pin to 7-Pin Straight Motor Cable (11.7")
• 7-Pin to 7-Pin Straight Motor Cable (7")
• Four-Slot 18650 Battery Charger
• 4 x 18650 Rechargeable Batteries
• AC Power Cord for Charger
• Wireless FIZ Hand Unit Strap
• Hard-Shell Waterproof Safety Case

• EBL 18650 Li-ion 3.7V Rechargeable Batteries

The Tilta Nucleus-M Wireless Lens Control` System features a 1000' transmission range, and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller, and two handgrips—one to control focus, and the other iris and zoom. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, which enables you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.

The FIZ hand controller allows you to control focus, iris, and zoom, and includes a neck strap. The handgrips feature adapters that enable mounting the controllers onto ARRI-compatible rosettes or onto 25/30mm diameter rods, such as those used with gimbals. The system comes packed in a waterproof hard case that protects your gear during transport and storage.

The Tilta Nucleus-M Wireless Lens Control` System comes with two lens drive motors with built-in wireless receivers a FIZ hand controller and two handgrips—one to control focus and the other iris and zoom.

The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors which enables you to freely swap or interchange each motor.

The motors power by daisy-chaining using the 7-pin cables (via P-tap) and each motor includes a 19mm rod.

Brand new unit, comes with mounts for shoulder mount and gimbal!

The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips with a range of about 1,000 Ft.

*What the kit includes:

• Wireless FIZ Hand Unit
• 2 x Wireless Motors
• 2 x 19mm Motor Rod Clamps
• 2 x 19 to 15mm Bushings
• 15mm and 19mm Quick Release Hand Grip Bridge
• Wireless Left Handle (Focus)
• Wireless Right Handle (Iris, Zoom)
• 4 x Follow Focus Disks
• 7-Pin to D-Tap Motor Power Cable (29")
• 7-Pin to 7-Pin Straight Motor Cable (11.7")
• 7-Pin to 7-Pin Straight Motor Cable (7")
• 7-Pin to ARRI Ext Run/Stop Cable
• 7-Pin to RED DSMC 1 Run/Stop Cable
• 7-Pin to RED DSMC 2 Run/Stop Cable
• 7-Pin to SONY LANC Run/Stop Cable
• 2 x Handle to ARRI Rosette Adapter
• 2 x Handle to Gimbal Bar Adapter (25 to 30mm Compatibility)
• Four-Slot 18650 Battery Charger
• 12 x EBL 18650 Rechargeable Batteries
• AC Power Cord for Charger
• Wireless FIZ Hand Unit Strap
• Hard-Shell Waterproof Safety Case

1x Wireless FIZ Hand Unit

3x Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings

1x Wireless Handle Left (Zoom)

1x Wireless Handle Right (Focus, Iris)

4x Follow Focus marking disks

1x 74cm 7-Pin to P-TAP Motor Power Cable

1x 37cm 7-Pin to 7-Pin Straight Motor Connection Cable

1x 28cm 7-Pin to 7-Pin Straight Motor Connection Cable

1x DSMC2 R/S Cable

2x Photographic Lens Follow Focus Adapters

1x 18650 4 Slot Battery Chargers

8x 18650 Batteries

2x Handle to Arri Standard Rosette Adapter

2x Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)

1x Manual

• 8 batteries

This is the full 2 motor, 2 handle and wireless unit Nucleus M follow focus package. Comes with 8 batteries as well as all the usual included accessories

The Nucleus-M is a revolutionary wireless follow focus system that is reliable and accurate. Mount the system to a Gimbal, Shoulder rig.... or perfect for the A/C to full control of focus, iris, and zoom on Cine lenses or compatible "cine-moded" DSLR lenses.

INCLUDED ITEMS :

- Tilta Hand Controller
- Right Grip for Focus and Zoom
- Left Grip for Iris
- (3x) Motors
- D-Tap Power Cable
- (2) Short Motor Cables
- (1) Long Motor Cable
- (6) Batteries
- Battery Charger
- (4) Marking Discs
- Universal Gimbal Adapters
- (3) 0.8 pitch motor gears
- (2) 0.5 pitch motor gears
- Tilta Hard Case

SEE MY OTHER LISTINGS
- Cinema Cameras
- Audio Equipment
- Tripods / Sliders / Jibs
- Canon L series Lenses
- Wireless Video Transmission Systems
- Complete Audio Kits
- Lighting Kits and Grip
- Wireless Follow Focus
- Drones

** Easy Pick Up & Drop Off in TriBeCa 3 blocks south of Canal St.
Trains: A/C/E 1 N/Q/R, & 6 train!**

Fiz unit, two motors, wireless hand controllers work well as a microforce or handles for a hand held rig.

Tilta Nucleus-M Wireless Focus. Great little kit for the price! Pretty much brand new condition. Can't go wrong for the price!

Comes with Hand Unit and 2 Motors

Does not include the handles.

Features:
• 1000' Wireless Range
• Two Lens Drive Motors
• Motors Feature Integrated Receivers
• 0.8 MOD Drive Gears
• Focus, Iris, Zoom Hand Unit
• Motors Daisy-Chain for Power
• Right Handgrip with Focus Control
• Left Handgrip with Iris and Zoom Control
• Hard-Shell Waterproof Case Included

Tilta Nucleus M Two Motor Kit.

*there is a $50 minimum in order to rent. You can either rent this for multiple paid days, add another item, or pay a $20 pick up fee.

Nucleus M follow focus system (hand unit, 2 motors, handle grips, battery charger, 4 batteries (needs 2), kit cables, tilts hard case. (I also have smaller N-nano system, Teradek, Ronin 2 etc).

Nucleus M Kit= FIZ and two motors - with batteries charger focus rings & case. Setup help available upon request :)