6 f-stop power variability (10 Ws to 320 Ws)
stepless slider adjustment from full to 1/32 power
1 second recycle to full power
1/1100 second flash duration (t.1) at full power
internally fan cooled for heavy duty use
WYSIWYG modeling previews
standard 120 VAC, 50-60 Hz power requirements
2.9 pounds total weight

The AlienBees™ B800 is a powerful, self-contained studio flash unit with adjustable output from full power (320 Ws) down to 1/32nd of the total power (10 Ws). This flashpower is adjusted on the back control panel with a slide fader, capable of adjusting in whole f-stop increments and everywhere in between. When adjusted from a higher to a lower setting, the unit will automatically dump the excess power for accurate output.

With precision voltage regulated circuits supplying consistent output, the B800 boasts true “what-you-see-is-what-you-get” modeling lamp accuracy. The modeling lamp can be set to full brightness, turned completely off, or set to track the power changes. Furthermore, the standard 150 Watt modeling lamp may be used as a recycle indicator, turning itself off when the unit is recycling, and coming back on to let you know when the unit is fully recycled and you are ready to shoot again. Ready for heavy-duty, all-day shooting, the AlienBees™ have built-in cooling fans to keep up with their fast recycle.

The B800 arrives with a sync cord allowing you to connect your camera to the unit to trigger the flash. The unit additionally has a built-in slave tripper to allow wireless firing. The unit has standard 120 VAC (50-60 Hz) power requirements and arrives with our 15-foot power cord to connect to a standard, grounded outlet for power.

Two day minimum rental.