Came Single Pistol Grip Gimbal with 32 bit encoders


Owner Notes:

Footage from this gimbal with an Sony A6300 20mm 2.8 Lens: https://vimeo.com/180693821
The new CAME-SINGLE is one of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer brushless motors with Encoders. Encoders are often used in Robotics for highly accurate monitoring of motor position. Some of the benefits of using Encoders are to: prevent motors from losing synchronization and skipping steps, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque, increases precision of stabilization, and more.​

Although Brushless Motors with Encoders have been available, the software used to control gimbals have only recently added support for Encoders. The new CAME-SINGLE with Encoder technology is truly advanced when compared to other systems.

The design of the CAME-SINGLE allows for one hand operation. A 1/4 and 3/8 thread is located under the handle for mounting options. The internal rechargeable batteries are fitted inside the pistol grip handle and the built in Joystick can be used for controlling camera positions and for changing modes.

The CAME-SINGLE has a quick release camera plate and is tool-less adjustments for easy and fast camera balancing. The size of the CAME-SINGLE is perfect for mirrorless cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras.

We have made changes to the CAME-SINGLE Battery. The original version required you to remove and recharge the batteries. The new version of the CAME-SINGLE has internal rechargeable batteries with higher Voltage built into the handle which allows for more power and stability to the system. This change allows the CAME-SINGLE to operate for up to 20 hours.

The Dual Gimbal Handles provide gimbal operators smooth camera panning and tilt motions. The tool-less adjustment of the handles provide easy configuration of the desired operating angle and spacing. The handles can also be configured to act as a stand when the handles are positioned right angled to the cross bar. The versatility of the handles allow for stability in while in use and easily converts to a stand for resting and storage.

Key Features:
Full 3 Axis Stabilization
Built in Joystick Control
32bit Controller + Brushless Motors with Encoders
Tool-less Design Easy to Balance + Quick Release Camera Plate System
New Encoder technology is more efficient. Batteries can operate up 20 hours when fully charged.
Larger frame than most pistol-grip Gimbal Systems allows cameras to fully Tilt up and down.
Larger motors when compared to other pistol-grip gimbals.
1/4"-20 thread mount on side of handle to support mounting a smartphone or monitor.
1/4" and 3/8" threaded mounts under handle; to attach the CAME-SINGLE to different equipment.
Comes with Hard Flight case.
Machined Aluminum Lightweight and Durable Build Quality.
Lightweight for easy carrying. The net weight of the CAME-SINGLE is only 1.2kg
Max payload 1.2kg (2.6 lbs). Works with Sony A7s, Panasonic GH4, BMPCC, etc.

Includes:

  • Charger
  • Carrying Case/Backpack

Condition: New
Replacement value: $1,000.00

$50.00

per day

$150.00

per week

$50.00

per weekend


Footage from this gimbal with an Sony A6300 20mm 2.8 Lens: https://vimeo.com/180693821
The new CAME-SINGLE is one of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer brushless motors with Encoders. Encoders are often used in Robotics for highly accurate monitoring of motor position. Some of the benefits of using Encoders are to: prevent motors from losing synchronization and skipping steps, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque, increases precision of stabilization, and more.​

Although Brushless Motors with Encoders have been available, the software used to control gimbals have only recently added support for Encoders. The new CAME-SINGLE with Encoder technology is truly advanced when compared to other systems.

The design of the CAME-SINGLE allows for one hand operation. A 1/4 and 3/8 thread is located under the handle for mounting options. The internal rechargeable batteries are fitted inside the pistol grip handle and the built in Joystick can be used for controlling camera positions and for changing modes.

The CAME-SINGLE has a quick release camera plate and is tool-less adjustments for easy and fast camera balancing. The size of the CAME-SINGLE is perfect for mirrorless cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras.

We have made changes to the CAME-SINGLE Battery. The original version required you to remove and recharge the batteries. The new version of the CAME-SINGLE has internal rechargeable batteries with higher Voltage built into the handle which allows for more power and stability to the system. This change allows the CAME-SINGLE to operate for up to 20 hours.

The Dual Gimbal Handles provide gimbal operators smooth camera panning and tilt motions. The tool-less adjustment of the handles provide easy configuration of the desired operating angle and spacing. The handles can also be configured to act as a stand when the handles are positioned right angled to the cross bar. The versatility of the handles allow for stability in while in use and easily converts to a stand for resting and storage.

Key Features:
Full 3 Axis Stabilization
Built in Joystick Control
32bit Controller + Brushless Motors with Encoders
Tool-less Design Easy to Balance + Quick Release Camera Plate System
New Encoder technology is more efficient. Batteries can operate up 20 hours when fully charged.
Larger frame than most pistol-grip Gimbal Systems allows cameras to fully Tilt up and down.
Larger motors when compared to other pistol-grip gimbals.
1/4"-20 thread mount on side of handle to support mounting a smartphone or monitor.
1/4" and 3/8" threaded mounts under handle; to attach the CAME-SINGLE to different equipment.
Comes with Hard Flight case.
Machined Aluminum Lightweight and Durable Build Quality.
Lightweight for easy carrying. The net weight of the CAME-SINGLE is only 1.2kg
Max payload 1.2kg (2.6 lbs). Works with Sony A7s, Panasonic GH4, BMPCC, etc.

Includes:

  • Charger
  • Carrying Case/Backpack

Condition: New
Replacement value: $1,000.00

Terra Luke Media Avatar

Terra Luke Media

Rating:
Response rate: 100%
I am an actor and filmmaker I love telling impactful and profound stories just as much as I love to tell stories that make you laugh. My production company is based in NYC and we focus on Films, Events, and Commercials https://vimeo.com/191364698 Read more »