The Bolt 500 3G-SDI/HDMI Video Transceiver Set from Teradek includes one Bolt 500 3G-SDI/HDMI video transmitter and one Bolt 500 3G-SDI/HDMI video receiver. The combination of these lets you transmit video signals a distance up to 500'. Both transmitter and receiver feature metadata and timecode support, 3D LUTs, dual inputs/outputs, are multicast capable, and offer manual frequency selection and the USB 3.0 GRAB Engine.
Bolt 500 3G-SDI/HDMI Video Transmitter
The Bolt 500 3G-SDI/HDMI Video Transmitter from Teradek transmits visually lossless video up to 500' with no delay. Within the unlicensed 5 GHz channel range, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the transmitter supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware. The built-in HDMI to SDI converter allows you to connect both your on-camera monitor and video source via the same device, thereby making Bolt 500 suitable for use with MoVI and other separately available gimbals.

Eleven 5 GHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power
Bolt 500 3G-SDI/HDMI Video Receiver
The Bolt 500 3G-SDI/HDMI Video Receiver from Teradek receives visually lossless video from up to 500' away with no delay. With 40 MHz channel, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the receiver supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs without any additional hardware.

Eleven 40 MHz channels
Supports full HD (1080p) resolution
Low latency of up to 0.001 sec
Integrated 3D LUT technology
Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
Housed in a hardened aluminum chassis
1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power

Kit Includes:
• Bolt 500 3G-SDI/HDMI Video Transmitter
• Bolt 500 3G-SDI/HDMI Video Receiver
• Ace 500 HDMI Video Receiver
• (2) 18" 2-Pin LEMO to PowerTap Cable
• 1/4"-20 Hot Shoe Adapter
• (2) 10" SDI (BNC-to-BNC) Cable
• (2) 18" HDMI Type A to Type A Cable
• 1.25" Long 1/4"-20 Thumb Screw
• 1/4"-20 Lightstand Adapter
• 3' USB 3.0 Type-A to Micro-USB Type-B Cable
• 6' PSU 2-Pin LEMO to 18W AC Adapter Cable
• Mini-USB (5pin) to USB - 18in/45cm Cable
• Ultra Thin HDMI Male Type A to HDMI Male Type A 18 Inch
• Power Adapter Cable 2-Pin D-Tap Male to 2.1mm Barrel DC (17.5 inches)
• R/A Barrel Power Supply Unit 18W AC Adapter 12VC 6 ft