The World's First Smart Microphone
Inside the V-Mic D3 Pro lives a microprocessor that digitally shakes hands with the audio input it's been plugged into. The D3 Pro will work with a phone, tablet, DSLR, bodypack transmitters; just about anything with a 3.5mm microphone jack. We have tested it on a dozen DSLR models, two dozen phones, a handful of Android-based tablets and the microphone inputs on laptops. When plugged into devices that have a stereo microphone input, the V-Mic D3 Pro outputs dual mono tracks. It can also be adapted to some microphone inputs that use the mini XLR jack.

The World's Only Microphone with a Stepless Gain Knob
The V-Mic D3 Pro features a +20dB step-less analog gain adjustment dial. On each side of the dial, the V-Mic D3 Pro features a bump guard that helps prevent the dial from being accidentally rotated. The +20dB of gain is added on a linear scale so you can dial in the exact amount of gain you need for the shot.

Internal Battery
Inside the V-Mic D3 Pro lives a 320mAh Lithium-Ion battery. Run time for the V-Mic D3 Pro is 51 hours and will automatically turn off if left in standby mode for 15 minutes. The battery is charged in a little less than 2 hrs.

On-Board Low Cut Filters
The V-Mic D3 Pro features two levels of low cut: 75hz and 150hz. And instead of a switch that is sunken into the frame that's hard to toggle, the D3 Pro does it all with a single button on top of the unit. With two levels of low cut, the V-Mic D3 Pro is ready for even the windiest day.

Rycote Shock Mount
We partnered with Rycote to design this unique, one of a kind on-camera shock mount. Our design allows you to mount the D3 Pro however you want: forward, middle, back. This means you can center it over your camera for perfect balance when using a gimbal. Underneath the hot shoe you will find a threaded female mounting point so you can mount it with a friction arm and use the V-Mic D3 Pro as a plant mic.