(2) MOVI PRO ADAPTER PLATES
(6) TB50 BATTERIES
4-BANK CHARGER

Want longer run times on your MōVI Pro? Then use DJI TB50 batteries on your MōVI Pro, more than doubling your run time!

The TB50 batteries are 98Wh vs. Standard 40Wh MōVI Pro and can output up to 10 amps each (~240W) so can handle the high draw from cameras and accessories!

The plates slide on and screw lock to your original MōVI Pro battery slots, so no wiggling around, a seamless fit ready for work on the most demanding sets!
This means you can also quickly change back to MōVI Pro batteries for drone/lightweight setups.

The Lemo ports allow you to get battery voltage (21-25.5V) to power Preston MDRs, rain spinners or other high draw accessories you may be having issues with on the MōVI Pro D-taps. The Lemo version comes with a 2 pin lemo out on both plates!

RUN TIMES with 2 x TB50s (will depend on payload, environment and use):

WEIGHT:

MoVI Pro battery weight/power: 305g/38Wh each

TB50 battery/power: 520g/98Wh each

TB50 battery adapter: 195g each

Total additional weight with 2 x adapters and 2 x TB50 batteries: 820g

CHARGER INFO FOR TB50s:
https://www.scribd.com/document/376257453/TB50-Chargers-Overview

Treat your batteries in pairs like on your Inspire 2 drone system, quad chargers are available as well!

The TB50s have built in heaters, which start warming the batteries when engaged to the plate, so you can maximise battery run times in cold weather!

You can also manually start the warming when the batteries are off the plate by holding the button down on the battery for 3 sec, lights 1/2 and 3/4 will flash alternately when warming up. Once at 20°C it will flash light 1 and 4 alternately.