Comes with:

1:1 Paralinx Arrow Plus
1 - 3" Male USB to male mini USB
1 - 3' HDMI cable
1 - 3' Mini HDMI to HDMI cable
1 - Female HDMI to female HDMI
1 - 20" 5V - 30V to D tap
1 - 20" 5V to D tap with Paralinx regulator
1 - 20" 2 pin LEMO to 5V - 30V
1 - 20" Mini USB to D tap
1 - 16" D tap to Paralinx female USB regulator
1 - 20" Male USB to 5V
1 - Paralinx shield
1 - 1:2 HDMI splitter
1 - 1/4 - 20 Thumb screw
1 - 1200 Pelican with foam

* Crossbow pictured no longer works
*Also, have external battery power to power transmitter and receiver if needed.

**Additionally have a black magic mini converter if you need to go to SDI instead of just HDMI.

The Paralinx Arrow Plus 1:1 is a 300 ft line-of-sight, wireless RF 1 Tx / 1 Rx set for sending uncompressed, 1080p, 4:2:2, 10-bit video with audio, with a delay of less than 2ms, from your camera to preview monitors. Both RGB and YCbCr are supported. The Arrow Plus chipset supports up to four receivers, and you can add additional receivers to the included ones at any later time. Both input and output are HDMI, and all units work plug-and-play.

Distances up to 330 ft have been recorded; non-line-of-sight reaches 150 ft. The receivers are about the size of a deck of cards. The transmitter is half that and camera-mountable using an optional Paralinx Shield. The frequencies used are 5.1 - 5.8 GHz. Antennas are built-in and omni-directional. Dynamic frequency selection automatically adjusts the frequency in case of interference from other RF systems. A specially enhanced version of the AMIMON WHDI standard is used for better wireless performance. Uncompressed monitoring allows for better detail in judging exposure.

•Transmits uncompressed, 1080p60, 4:2:2, 10-bit, with less than 2ms delay
•300 ft line-of-sight, 150 ft non-line-of-sight
•Supports RGB and YCbCr
•HDMI interface; plug-and-play operation
•5.1 - 5.8 GHz frequencies
•Dynamic frequency selection in case of interference