Filipp P
Director of Photography / Cinematographer
Brooklyn, NY Member since September 2015
Working as a cinematographer for over a decade. Member of Local 600. Loves cats. Based in NYC.
Working as a cinematographer for over a decade. Member of Local 600. Loves cats. Based in NYC.
Includes: 503 Monitor, Ultralight Arm, Lemo Power Cables, Sdi Cables, HDMI Cables
INCLUDES
OWNER NOTES
This is by far the brightest 5" onboard monitor on the market. It's a must have for gimbal and handheld operators who want to see a clear image in full daylight without the need for a hood.
Input: 2-SDI, HDMI
Output: SDI, HDMI
Display: 5-inch, 1920x1080, 2200nits, Gorilla Glass
Power Consumption: 11 watts
Weight: 15 oz
Includes: 703 Monitor, Lemo power, sdi, hdmi cables, Wooden Camera Director's Monitor Cage v2
INCLUDES
OWNER NOTES
The Brightest 7-inch monitor available with HDR Preview, Waveform, 3D LUT support and 12v Lemo power. Comes mounted on Wooden Camera's Director's Monitor cage v2 with Anton Bauer or V-Mount options.
Includes: WCU-4 Handunit, SXU-1 Handunit, UMC-4 Motor Controller
INCLUDES
OWNER NOTES
This is a complete and modular kit that lets you use all the features of the latest Arri lens control system. There is a second hand unit that can be used of iris or the kit can be split to control two cameras if needed. Comes with start/stop control cables for most popular camera systems.
Includes: 1 x Tomahawk2 SDI/HDMI Transmitter, 3 x Tomahawk2 SDI Receivers, 1 x Tomahawk2 Mounting Bracket (for transmitter)
INCLUDES
OWNER NOTES
This best in class wireless video system is for long range, zero latency monitoring including gimbals, steadicam, and drones.
The Tomahawk2 features several improvements from the original Tomahawk:
Dual-Input Transmitter (HD-SDI & HDMI)
Receiver is lighter and 60% smaller
Input voltage range is now 6-28V on Transmitter
Machined-aluminum Receiver enclosure improves durability
Integrated 1/4-20 & 4-40 mounting points on Tx/Rx
Compatible with Teradek Bolt 2000 (2nd Gen) and Teradek Bolt Sidekick (1st Gen)
Compatible with Paralinx Tomahawk (1st Gen)*
Manual Channel Selection & Pairing Interface using new on-screen menu interface
The Paralinx Tomahawk2 has a range of up to 2000 feet** (600m) and maintains an incredible <1ms latency glass-to-glass. Both the transmitter and receiver feature 2-Pin power connectors and the transmitter features a wide 6-28V input voltage range (receiver has 7-17V input). The Tomahawk2 system features both 3G-SDI input (with loop-out) & HDMI input on the transmitter, and a 3G-SDI output on the receiver.
The Tomahawk2 transmits Full-HD video (up to 1080p/60 4:2:2) and is capable of sending video to up to 4 receivers simultaneously. The transmitter weighs approximately 7.3oz/208g (without antennas) and the receiver weighs only 8.9oz/252g (without antennas).
Tomahawk2 Features:
Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload
Transmitter features both 3G-SDI & HDMI inputs and SDI loop-out. Receiver features 3G-SDI output.
Rugged machined-aluminum enclosure for both the transmitter and receiver
Ultra long-range transmission - Up to 2,000 feet (600 meters) **
REAL-TIME viewing - Less than 1 millisecond latency
Visually lossless full-HD video signal allow critically accurate monitoring
Multicast capable (up to 4 receivers per transmitter)
128 bit AES Encryption - Secure transmission
Operates on 5gHz frequency band
Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications
Includes: WCU-4 Handunit, 2 x Cforce Mini Motor, 1 x Cforce Plus Motor
INCLUDES
OWNER NOTES
This is a must have wireless lens control kit for Arri Alexa Mini but works on any camera.