The Dana Dolly Original Kit with original style track ends is a heavy-duty camera dolly platform that rides on 16 custom modified soft polyurethane wheels that resist flat spotting and use ABEC-7 rated precision bearings providing you with extremely smooth dolly shots. The wheel trucks swivel, allowing the dolly to ride on available straight or curved track, which you must source separately. The manufacturer recommends using standard speed rail or Schedule 80 aluminum pipe of compatible size. The dolly includes two original style track ends, which accept an inch and a quarter pipe (standard speed rail) and fit into available standard Junior stand receivers. Center support is included for long-track runs or when using heavy cameras.

The dolly platform is machined from aluminum and features a standard Mitchell mount including a 2.75" center hole with a machined keyway. The included 75mm and 100mm bowl adapters allow you to mount fluid heads with standard 75mm or 100mm leveling balls. The platform incorporates one 3/8" through-hole, one 1/4"-20 threaded hole and one 3/8"-16 threaded hole on each side of the dolly platform for a total of 6 accessory mounting holes. The Dana Dolly is designed and manufactured in the USA.

The Lowboy Steel Stands, are able to support 66 lb, at the height of 6.5'. The Lowboy Steel Stands with Leveling Legs and Combo Heads from Impact are heavy-duty, chrome-plated steel light stands with three sections, two risers, and a maximum height of 6.5'. A 41" footprint provides extra stability, as does the center column that can be adjusted until it contacts the floor. A special feature is its adjustable leg that extends to level it on uneven terrain or when positioned on stairs or in tight spaces. The Impact Lowboy has a 1-1/8" Junior receiver and a retractable 5/8" pin that can be swung 90 degrees, allowing gear to be mounted on it vertically or horizontally. The stand accepts optional wheels that make movement easy without lowering your gear. Once in place, they lock down securely.