(1) Lectrosonics transmitter w/ power and input cables

The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless® receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship.

It can be configured to operate as a “one touch” device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function.

Frequencies are selectable in 100 kHz or 25 kHz steps, yielding a total of up to 3072 available frequencies across three standard frequency blocks. An IR port on the membrane panel enables automatic setup when coupled with an IR enabled receiver. A USB port on the side panel allows firmware updates to be made easily.

The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. A menu selectable instrument level input is available on the LCD. Accurate LED indications on the top panel and a bar graph indicator on the LCD allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion.

The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio with no risk of overload distortion.

The unit is powered by two AA batteries or an optional battery eliminator that replaces the hinged battery door. A wire and a spring loaded belt are available.

The housing is machined from a solid aluminum billet, finished with an ultra hard, black electroless nickel finish called ebENi.

(1) Lectrosonics receiver w/ power and output cables
The two-channel slot-mount Digital Hybrid Wireless® diversity SRb receiver offers two independent channels and fits into the standard video camera slots found on professional cameras. The two audio channels can feed separate inputs or can be mixed internally to feed a single input. This listing is for the receiver only. End plate kit not included. NOTE: Not all cameras have two audio channels enabled in the slot.

WE OFFER FREE DELIVERY IN NYC WITH 24 HOUR NOTICE!
If you'd like your rental delivered be sure to include your delivery info in your KitSplit rental request.