"(1) SD788T w/CL-8, bag, cables and accessories
(7) Lectrosonics talent wireless w/ lavalier
(1) Sennheiser Shotgun w/ boompole
(1) BDS Power distro kit

Inputs and Outputs

The 788T features eight high bandwidth, ultra-low noise microphone preamplifiers. Inputs feature input limiters, input delay, and selectable high-pass filters. The 788T also accept analog line level or AES digital signals. Six analog and six digital outputs are available on multiple connector types, including TA3, multi-pin, and 3.5 mm.

Routing and Tracks

Any input can be routed to any of 12 recording tracks. This offers iso recording of inputs plus recording a two-channel mix and two aux tracks. Any record track can be assigned to each of the three recording media. This allows, for instance, a two-mix to be recorded to CompactFlash while isos and a mix can be simultaneously recorded to the internal drive.

File Storage and Transfer

The 788T has three options for recording media, internal drive (SSD or hard drive), CompactFlash card, or external FireWire drive. Any or all of these can be used simultaneously. The 788T can be connected to Mac OS or Windows computers for high-speed data transfer.

Timecode & Word Clock

With its on-board high-accuracy Ambient timecode generator the 788T is at home in complex multi-camera sync-sound productions. Use the 788T as the master clock for the most accurate on-set timecode reference. All common timecode frame rates and modes are supported. Word clock I/O can be used for sample-accurate multi-device connection.

Controls

The 788T controls are fast and intuitive with easy to access buttons, scroll wheel, pop out gain and an informative front panel display. The 788T also offers a USB keyboard input for control and metadata editing. The available CL-8 and CL-9 controllers offer dedicated faders and controls for the 788T.

Mix Assist

Mix Assist “auto-mixes” the post-fade outputs by automatically reducing, or attenuating, the level of microphones that are not active. Mix Assist helps maintain consistent background sound level regardless of the number of open microphones. It reduces comb filtering and phasing when multiple microphones pick up a single sound source. It also increases gain before feedback when the recorder is feeding a sound reinforcement system.

788T System

The CL-8 or CL-9 Controllers enhance the 788T System by adding extensive mixing capabilities, whether working in a production bag or on a sound cart. Along with the CL-WiFi, Wave Agent, CL-1, and CL-2 accessories, the 788T system can be customized for any production sound environment.

Internal Sampling Frequency 32, 44.1, 47.952, 48, 48.048, 88.2, 96, 96.096
External Clocking Sampling Frequency 32–96.096 kHz via word clock or digital inputs
Internal Data Path and Processing 32 bit, 192 dB dynamic range
Input Impedance Mic (XLR and TA3): 3.3k ohm; Line (XLR and TA3): 3.3k ohm
Input Clipping Level Mic input: +8 dBu minimum (gain = 10 dB); line input: +26 dBu minimum (gain = 0 dB)
Input Topology Mic and Line Fully electronically balanced, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold
Common Mode Rejection Ratio Mic: 40 dB minimum at 80 Hz
Metering 112-segment (8 x 14), sunlight-viewable, selectable peak, VU, or peak (with or without peak hold) with VU ballistics, variable brightness
Mic Powering 48 V phantom through 6.8k resistors, 10 mA per mic available, menu-selected per channel in mic or line level positions
Line Output Clipping Level +24 dBu minimum, 10k ohm load
Output Topology Line Fully electronically-balanced, RF, ESD, short, and overload protected; pin-2 driven hot, pin-3 driven cold; let pin-3 float for unbalanced connections.
Digital Storage Internal hard drive SATA interface 2.5-in hard drive 4200–7200 RPM supported, solid-state drive (SSD) support, FAT32 formatted, up to 2 TB addressable
CompactFlash CF type I, II, and + (microdrive) compatible, UDMA (300x) compatible, FAT32 formatted, up to 2 TB addressable
File Types Record: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit;
Playback: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit;
MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo; MP2 @ 64, 96, 128, 160, 192, 256, or 320, 384 kb/s stereo
Utilities Drive formatting and speed test for internal hard drive, CF and external drive volumes
Time Code Modes Supported: Off, free run, record run, 24 hour run, external time code receive
Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+
Accuracy: 0.2 ppm, when tuned with Ambient Master Controller, holds TC clock for 4 hours after main battery removal; after 4 hours, retains time of day
Input / Output 20k ohm impedance, 0.3V p-p (–8 dBu) minimum / 1k ohm impedance, 3.0V p-p (+12 dBu)
Word Source Internal Sync: internal word clock generator
External Sync Input: Word Clock, AES3, or Video (NTSC, PAL, and Tri-Level)

WE OFFER FREE DELIVERY IN NYC WITH 24 HOUR NOTICE!
If you'd like your rental delivered be sure to include your delivery info in your KitSplit rental request.