Your request is pending approval and will go through as soon as our team has approved it. This normally happens within 24 hours but can sometimes take longer.
Speed this process up by making sure your profile is completely filled out. Add a profile pic, links to your website, reel, and/or social media, and fill out your profile description. This not only helps us but also improves your odds of having a rental accepted by gear owners!
If you are in a rush, please contact us at contact@kitsplit.com.
Interviewers, Podcaster, Vloggers
Lightning Connector for iOS Devices
2 x 3.5mm TRRS Microphone Inputs
3.5mm Headphone Output for Monitoring
Up to 24-Bit / 48 kHz Resolution
Bus Powered / iPhone,
per day
WEEK/WKND RATESEquipment Replacement Value: $125
Interviewers, Podcaster, Vloggers
Lightning Connector for iOS Devices
2 x 3.5mm TRRS Microphone Inputs
3.5mm Headphone Output for Monitoring
Up to 24-Bit / 48 kHz Resolution
Bus Powered / iPhone, iPad, iPod
Pairs with Rode Reporter App
Stereo or Dual-Mono Recording via App
Preamp Gain & Direct Monitoring via App
Works with Stock iOS Audio/Video Apps
UPC 698813005451
Swiftly record two-person interviews, podcasts, and vlogs straight to your iPhone, iPad, or iPod with the RODE SC6-L ultracompact 2x2 Lightning audio interface and a pair of TRRS-equipped microphones (mics available separately). Pocket-friendly and bus-powered, the SC6-L is perfect for keeping your setup small and simple while maintaining quality and enjoying app-based optimization.
At one end of the SC6-L, you'll find two 3.5mm TRRS jacks to accept signal from microphones such as the Rode smartLav+ lapel mic, Rode VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS outputs. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal to make sure it is clean and free of distortion.
At the other end of the interface, a short cable is terminated with a Lightning connector, which connects directly to your iOS mobile device to facilitate convenient and clear recording at digital resolutions up to 24-bit / 48 kHz, making it a broadcast-quality unit.
Use the SC6-L with the Rode Reporter app to change preamp gain, switch between summed stereo or dual-mono record modes, and turn direct monitoring on or off, all from your Apple mobile device (iOS 11 or later required). Alternatively, you can use the SC6-L with other audio/video apps such as the onboard Camera app, GarageBand, Voice Memos, and more.
Easy Two-Person Recording
Strapped with the SC6-L and a couple TRRS microphones (available separately), you can easily capture two-person interviews, podcasts, and vlogs to your Lightning-equipped Apple mobile device in record time.
Dual 3.5mm TRRS Mic Inputs
Separate 3.5mm TRRS mic inputs are provided on the SC6-L to accommodate two TRRS microphones such as the Rode smartLav+ lapel mic, Rode VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS outputs.
Real-Time Headphone Monitoring
Connect earphones or headphones to the 3.5mm headphone port to monitor your input signal or the playback from a recording.
No Batteries Required
Since the SC6-L is bus powered through the Lightning connection to your iPhone, iPad, or iPod, no batteries are needed.
App-Based Optimization
When using the SC6-L with the Rode Reporter app, you can adjust the mic preamp gain, choose between summed stereo and dual-mono recording, and enable/disable direct monitoring from your Apple mobile device.